How much is the price of 1070 aluminum sheet?
The price of 1070 aluminum plate is related to its specific specifications, length, width and thickness, and specific specifications and specific quotations are required. Yongsheng Aluminum is a manufacturer of 1070 aluminum sheets, with a thickness of 1-500mm and a width of 2650mm. Henan Yongsheng supplies 1070 hot-rolled aluminum plate, 1070 medium-thick aluminum plate, 1070 ultra-wide aluminum plate, 1070 pattern aluminum plate and so on. Yongsheng Aluminum is a regular and large-scale aluminum plate manufacturer with complete product specifications and low prices. If you want to know more product details and preferential quotations, you can initiate an inquiry online.
Product Introduction
The aluminum content of 1070 aluminum plate reaches 99.7%. It has the characteristics of high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity. It is used to manufacture some structural parts with specific properties, such as protective nets for wires and cables, cores and ventilation. System parts and decorative parts.
Advantages of Yongsheng 1070 Aluminum Sheet
1. Aluminum alloy has long service life, low cost and high recycling value.
2. 1070 hot-rolled aluminum plate has high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity, and can accept contact welding and gas welding.
3. Yongsheng strictly controls the processing quality, texture, grain structure, composition, etc. of the products, and the product performance has reached the international advanced level.
Mechanical properties of 1070 Aluminum Sheet
Tensile strength σb (MPa): ≥55
Conditional yield strength σ0.2 (MPa): ≥15
1070 Hot-rolled Aluminum Sheet heat treatment process
1. Complete annealing: heating at 390~430℃; the holding time is 30~120min depending on the effective thickness of the material; cooling to 300℃ with the furnace at a speed of 30~50℃/h, and then air cooling
2. Rapid annealing: heating at 350~370℃; the holding time is 30~120min depending on the effective thickness of the material; air or water cooling
3. Quenching and aging: quenching at 500~510℃, air cooling; artificial aging at 95~105℃, 3h, air cooling; natural aging at room temperature 120h
Technical Parameter
Typical Alloy | 1070 Aluminum Sheet |
Temper |
F,O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H111,H112,H114 |
Thickness(mm) | 0.1-500 |
Width(mm) | 100-2650 |
Length(mm) | 500-16000 |
Typical Product | Radiators, charging piles, anti-corrosion insulation, protective nets for wires and cables, aluminum bus bars, electronic products, oxide materials, etc. |